The sounds you don't want to hear sewing:

Crunch, Crunch, Grinds, Pop, Bang and then alarm bells and a flashing light.  That is what my Janome Memory craft 4900 does when it is about to  give me a heart attack.  I was working  on work sewing this AM when the above mentioned happened. I thought I would share this with you in case you run into similar problems.  I have had this machine for 11+ years now and I have to say I really like it a great deal but because it is wrapped in plastic  and it has computer mother board and  because of the the price of repairs this - machine scares me.  I have only had one problem with it in 11 years:  The bobbin case!  I thought this time the machine was toasted for sure and I started looking at similar machines.  Honestly I considered putting a Juki on my wish list but when I read the specs, basically it is the same machine. In reality  I am not in the market for spending 1,000.00 right now!
So I asked the Lord to bless me with a little extra machine knowledge. so that I could fix it myself. Taking it to a shop is do-able but it would have cost around $150.00 if not more. Bottom line, I am buying a part for $9.99 shipping included.  Here is what the problem was:

This bit of grossness had me considering a new machine!.  That bit was enough to throw the bobbin case out of the race while I was sewing, jam up the needle bar, cause a huge thread nest, puncture the bobbin case and send a needle flying in 3 pieces. I had to put the machine aside and get another one in to the work line up.

Tonight I took a closer look at the case 


I discovered a large amount of impacted lint on the inside of the race, I cleaned it and noticed the bobbin case sat much better, but not better enough.  I flipped over the bobbin case and discovered a residue of plastic from the needle punctures.  I sanded this down .  It sat very well after that, and best of all my trial stitching came out perfect!  Sigh of relief.  I still ordered a new bobbin case for $9.99 and I will wait till it comes into use the machine again just to be safe, I am happy to  know the machine if just fine and it really only took me 45 minutes and a few dollars to fix.  I'm all for supporting the local sewing machine shop, but this would have been a 109.00 service visit plus 39.00 for a new bobbin case.  If I could not have fixed it, it would have been well worth $150.00.  It is well worth your time to get a few machine maintenance and repair skills in your tool box, It will go a long way to preserve your machine and your pocket book!

Speaking of tool box, this is a Hero in the sewing world!


I refill this with silicone oil, it is cheap and works wonders!  Here is a great tip for you commissioned sewers:  Silicone oil does NOT stain fabric!  So if you over oil your machine a bit - no problem!!

Thanks for stopping by and I hope this may help you down the road!!
Ginny M




Comments

kiwimeskreations said…
Oh Ginny what a scare - I have lost a few needles too when the bobbin thread has jammed, but I have never had to replace my bobbin case, thankfully. We do not have a repair shop here in town, so had to take it to the nearest agent for Elna a couple of years back - thankfully the bill for it's first maintenance in 20 years was little over the $100. Although we had to travel to get it serviced, I made sure we took it in and collected it when we had to go to that city for medical appointments! Scrooge that I am.
Happy sewing, and blessings
Maxine
June 13, 2016 at 7:10 PM
Shaz in Oz.CalligraphyCards said…
Ah Ginny so know what you mena, broke a needle the other day, think it just worked loose...
.. thankfully I have a really good repairman who does wonders for little bit of money under $90 for what would have been ages, in last service and clean. I cant because of my limited skill even dream of attempting what would have been required last time.. but agree on repair rather than replace, my machine is metal/ and part plastic, a heavy duty one and about 30 years old just dont get them that sturdy anymore.. I can do basics but that is all..so glad for the LORD's mercies for you,
Shaz.x
June 13, 2016 at 8:40 PM
Post a Comment

Popular posts from this blog

How to Make Sweet Little Paper Dress Cards!

Image
I recently watched a You Tube video on how to make an origami Paper dress, I thought these would make the sweetest card for all occasions!  So I had a great time crafting with friends and making these adorable dress card! These three are my favorites: I used an old Stampin' Up background stamp for the background on most of these. I left the sentiment off, for now, that way I can turn these into whatever I need them to be when I get ready to send it! I used the Best Glue Ever to hold the layers and the dresses- worked great!  This adhesive allows the folded paper to keep its spring by not soaking into the fibers - no wet spots showing through or dents. Just a tiny drop and bead hold it down perfectly Add glue and then put a book on it to flatten it a bit For the delicate die cut sentiment and embellishments, I also used the BGE If you are interested in learning how to make these, here is the video I used, th
Read more

Tutorial: Making Napkin Cards

Image
Here is a fun tried and true old fashioned card making technique. Long before we had all these sumptuous patterned papers we had gorgeous napkins! For depth of color and interesting texture, you can't beat them especially for the money! Most you you may have done these so this will be an ‘Oh Yeah’ moment! Have fun! You can start with any size paper napkin - I like to pick min up at Tuesday Morning, they have a wonderful selection and are usually marked down Separate the printed surface from the tissue backing - these napkins are usually 3 layers I cut my panels to fit a light weight piece of cardstock I drizzled glue on the card stock and then added my napkin panel I found it was easier to keep the light and floaty napkin on the table and then place the gluey paper on it Gently smoothed it a little bit - remember the napkin layer is very fragile I gave it a few minutes to set up and the just added a puddle of Lineco glue. You can also
Read more

How To Restore A Vintage Rubber Stamp

Image
I have a lovely Vintage  Magenta Cat Stamp, I'm not sure of the exact year of release, but I'm pretty sure it is about 20 years old, It appears to be in perfect condition.   But on inspection, I can feel that the rubber has gotten a little dry and "tough" and what that means is that I won't get a good impression from it.  I bet you have run into the same thing with some of your older stamps!  Don't toss the stamp, there is a way to restore them pretty easily! I have on hand the little sanding blocks you can buy for about $2.00 at the hardware store.  The are very handy in the craft room!  I gave this stamp a vigorous rubbing and then wiped off the dust with a damp wipe Next a coat of glycerin - a $4.00 drugstore item - you can also re-ink your embossing/resist pad with this! Let it sit over night and then wipe with a damp towel.  Your stamp should have that nice soft rubber texture.  Now the ink will sit on the rubber!  I inked up
Read more